Name: USA Lab 50L Dual Setup Explosion Proof Rotary Evaporator Turnkey System
Brand: USA Lab
SKU: EXRDS-1050-VB-TK
Price: 34014.52 CAD
Availability: OutOfStock

Description

*** In Stock ***

The USA Lab 50L EXRDS Series rotary evaporator turnkey system recovers solvents efficiently and fast with two times the surface area for condensing and twice the recovery volume. Our EXRDS series evaporator is an explosion proof evaporator with brush-less motors and enclosed internals to prevent any flammable / explosive material from touching the internals via seals.

This unit provides consistent and repeatable results at an affordable price. With dual condensers and dual receiving flasks made of GG-17 High Borosilicate Glass, all pieces have been designed for efficient use of surface area, higher capacity's and higher recovery rates. This means faster recovery without compromising quality. Our evaporators come standard with safety features such as over-temperature shut off and dry-run protection. All valves and ports are high efficiency allowing a continuous feed of material as well as draining the receiving flask without breaking vacuum.

This turnkey system comes equipped with two of our 50L DLSB-50/30 -30°C chillers, providing low temperatures and high flow rates for each condensing set-up. This allows for higher recovery rates than a single condenser set-up or using one chiller on two condensers. Our turnkey set-up also comes equipped with one of the highest quality diaphragm pumps made by Vacuubrand. The MD 4C NT 2.2CFM pump is rated for 15,000 hours maintenance free and provides a superior vacuum with an oil-free, corrosion resistant system.

No expense has been spared with these evaporators, yet we crush the market on pricing to provide great value at a low cost. Our evaporators are the best value on the market and each one comes with fantastic customer service, local product support and a 1 year warranty.

This Kit Includes the Following:

1pc: EXRDS-1050 50L Explosion Proof Rotary Evaporator with Dual Condenser Set-up

2pcs: DLSB-50/30 50L -30° Chillers

1pc: Vacuubrand MD 4C NT 2.2CFM Chemistry Diaphragm Vacuum Pump

2pcs: 5 Gallons of Propylene Glycol USP

2pcs: 10ft Vacuum Hose

2pcs: 11ft Insulated Chiller Line

EXR-1050 DC SPECIFICATIONS

•Glass Material: GG-17 Borosilicate Glass

•Evaporation Flask Capacity: 50L

•Collection Flask Capacity: 20L

•Rotary Speed: 20-120RPM

•Bath Temperature Range: Room Temp to 180°C /356°F

•Lifting Mechanism: Electric

•Power Requirements: 220V 60Hz 30A Single Phase

•Power Requirements: HARD WIRED ONLY

•Temperature Control Accuracy: +/-1°C

•Motor Wattage: 250W

•Heater BTUs: 22,000BTU

•Achievable Vacuum: 399.9Pa

•Evaporating Capability: Water≥13L/H; Alcohol≥27L/H

•Water Bath Volume: 77L

•Dimensions: 52"L x 45"W x 84"H

•Condensing Volume: Main: 0.91㎡ x2; Auxiliary: 0.52㎡ x2

•Speed Regulation: Digital Step-Less

•Vacuum Barb: 13.3MM

•Condenser Barb: 15.5MM

*PACKING LIST*
USA Lab 50L EXR-1050 Rotary Evaporator Base	1 set
50L Bath Cover	1 pc
Main Condenser	2 pcs
Auxiliary Condenser	2 pcs
50L Boiling Flask	1 pc
20L Receiving Flask	2 pcs
50L Flask Cover	1 pc
Four-Way Bump Trap	1 pc
Vapor Duct with Seal (Pre-Installed)	1 set
PTFE Vacuum Sealing Kit (Pre-Installed)	1 set
Glass Vacuum Port with PTFE Valve	6 sets
Glass Feeding Tube with PTFE Valve	2 sets
PTFE Feeding Tube Extension Hose	1 pc
Vertical Stand	2 pcs
Vacuum Gauge	1 pc
Support Ring	4 pcs
Rubber Strap for Condenser	2 pc
Clamp with PTFE Gasket	16 sets
Evaporating Flask Screw Aid	1 pc
Allen Key	2 pcs
63A Fuse	1 pc
Screw Nuts for Clamps	2 pcs
Springs for Clamps	2 pcs
Gasket for Clamps	4 sets
3oz. Vacuum Grease	1 pc
Vacuum Hose	10ft.

MD 4C NT

Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance.

Performance features

outstanding chemical resistance and superior vapor tolerance
exceptionally high performance even at low vacuum
excellent ultimate vacuum even with gas ballast
whisper quiet and very low vibration
long diaphragm life, maintenance-free drive system

Technical data

Technical data	Unit	MD 4C NT
Number of heads / stages		4 / 3
Max. pumping speed at 50/60 Hz	m3/h	3.4 / 3.8
Max. pumping speed at 50/60 Hz	cfm	2.0 / 2.2
Ultimate vacuum (abs.)	mbar/torr	1.5 / 1.1
Ultim. vac. (abs.) with gas ballast	mbar/torr	3 / 2.2
Ambient temperature range (operation)	°C	10 - 40
Ambient temperature range (storage)	°C	-10 - 60
Max. back pressure (abs.)	bar	1.1
Inlet connection		Hose nozzle DN 8-10 mm
Outlet connection		Hose nozzle DN 8-10 mm
Rated motor power	kW	0.25
Rated motor speed at 50/60 Hz	min-1	1500/1800
Degree of protection		IP 40
Dimensions (L x W x H)	mm	325 x 243 x 198
Weight	kg	14.3
Noise level at 50 Hz, typ.	dBA	45
NRTL certification		Canada and the USA
ATEX conformity (only 230V)		II 3/- G IIC T3 X Internal Atm. only
Items supplied		Pump completely mounted, ready for use, with manual.
Accessories		Rubber vacuum tubing DN 8 mm (20686001)

MD 4C NT - Pumping speed graph at 50 Hz

MD 4C NT - Pump down graph at 50 Hz (10 l volume)
MD 4C NT - Pumping speed graph at 60 Hz
MD 4C NT - Pump down graph at 60 Hz (10 l volume)
-Technical data are subject to change without notice-

MD 4C NT - Dimension sheet

We ship all glassware products with additional care, but sometimes they arrive broken. If glassware arrives broken, please contact us within 3 days

of receiving your product and we will either send you a brand new piece or send you a refund!

Any glassware broken after delivery voids all warranties. Thank you for understanding!

1 Year parts and labor warranty included. Does not include glassware.

For Technical Support, Questions, or Other Issues Please Email or Call Us!

USA Lab Equipment

Livonia, MI 48150

Details